Travel - Head-End set of 6 PAL VSB channels from 6 COFDM multiplexes.

TRAVEL headends are economical, high performance and space-efficient all-in-one solution comprising set of 6 Digital Terrestrial TV receivers that deliver 6 TV programmes on conventional, analogue UHF channels.
The headends consist of 6 receivers and a PSU arranged on a metal, wall-fixing baseplate. The receivers are pre-linked and ready for use. All that needs to be done is to program the units using the SPI-300 programming tool!

• The headends have six loop-through pre-configured F input ports - one per receiver.

• The 6 channel combined output is delivered at the output port.
• The headend is powered as a whole when connecting it to the mains.
• By using the supplied jumpers, a +24V voltage can be easily injectedto power up a masthead amplifier if required.
• The six receivers are individually programmable.

Input
Input: 6 x f type - loop-through configured
Signal type: Free-To-Air
Modulation: COFDM
Frequency band: 470-862 MHz
Level: 35...100 dBµV
Bandwidth: 7  /  8  MHz
Operation Mode : 2K  /  8K
Constellation : QPSK  /  16QAM  /  64QAM
Impedance : 75 ohms

Video decoding
MPEG-2 - MP@ML
Image Format: 16/9 - 4/3 Pan&Scan - 4/3 Letter-box
Teletext and Subtitles Insertion: Yes

Audio decoding
MPEG-2 - Layer 2
Modes: Mono - Stereo - Dual

Output
Output: 1 x f type
Signal: 6 UHF Channels
(TRAVEL headends may use adjacent channels)
Frequency band: 470-862 MHz
TV Standard: B - G - D - K - I - L
Colour System: PAL - SECAM
Spectrum: VSB
Sound: Mono
Carrier level ratio: 12 / 16 B
RF Level: 74 dBµV (adj. -10dB)
Impedance: 75 Ohm

General
Mains voltage: 110-240 V – 50 Hz
Consumption: 55 W
LNB line powering: 13/18V – 300 mA - 0/22 kHz
Operating temperature: 0...+40 °C
Outside dimensions (w x h x d): 300 x 260 x 215 mm
Packed weight: 9.5 kg

Programming
Programming of each receiver module involves the following selections and settings:
- Central Input Frequency (125 kHz steps)
- Bandwidth (7 or 8 MHz)
- Hierarchy Level (high or low priority)
- TV Programme and Audio Service
- Parameters of the output TV channel (video carrier frequency, TV standard, colour system, video modulation depth, audio modulation index, carrier level ratio, output level).
- Image Format (16:9 to 4:3 Pan&Scan and 16:9 to 4:3 Letter-Box conversions)

Full Specification (PDF)